Frank’s Nail Wizard™ Resharpenable Circular Saw Blades

Built To Last. Keeps Paying You Back.

When you’re cutting nail-loaded pallet lumber all day, most blades don’t fail because of one bad cut — they fail because they weren’t built for the job in the first place.

Frank’s Nail Wizard™ changes that.

This blade was developed through Fuelbox’s partnership with Frank’s Industrial Sharpening — A Fuelbox Company, combining decades of real-world sharpening experience with a design that prioritizes durability, repeat performance, and long-term value — not just first-use performance.

What Makes It Different (And Why It Matters in Your Pallet Plant)

Thicker .160 Plate (Not the Standard .132)
 More steel where it counts. Less flex, less vibration, and more stability through tough cuts.
 Translation: straighter cuts and fewer headaches on your saw.

Nickel-Infused Plate Construction
 Built with 5% nickel to resist heat distortion and warping.
 Because a blade that warps is a blade you’re throwing away too early.

Oversized Carbide Tips (35% Cobalt)
 Most blades out there are running ~15% cobalt tips.
 This isn’t that.

These are oversized, high-cobalt tips designed to take abuse from nails, fasteners, and inconsistent pallet material — and keep cutting.

Triple Chip Grind with Zero-Degree Hook
 Engineered for controlled, consistent cutting through nail-embedded wood:

• Reduced tooth breakage 
• Cleaner cuts 
• More predictable performance across mixed material 

Built to Be Resharpened — Again and Again
 This is where the value shows up.

More carbide means more sharpenings before retipping.
 More sharpenings means lower cost per cut over time.
 And when it finally needs new tips? The plate is still worth keeping in service.

Available Sizes

• FB1 ∙ 14" x 24T x 1" Arbor 
• FB3 ∙ 16" x 30T x 1" Arbor 
• FB2 ∙ 18" x 36T x 1" Arbor 

Why It Wins in the Real World

Most pallet operations are stuck choosing between:

• Cheap blades that don’t last 
• Or expensive blades that still don’t hold up to nails 

Frank’s Nail Wizard™ sits in a different lane.

It’s designed for:

• High-nail-content recycled pallets 
• Operations tired of constant blade swaps 
• Teams that track cost per cut — not just purchase price 

And it’s backed by sharpening expertise that understands how these blades wear in the real world — not just how they’re supposed to perform on paper.

Bottom Line

If you’re going to run a resharpenable blade, it better be worth sharpening.

This one is.